fbpx
 

Alucomex® Acetic Silicone

For general purposes

Description

Alucomex® Transparent Silicone is a monolithic, acetic, anti-fungal thixtropic for general use. The cure of this material occurs at room temperature and with exposure to humid air, forming a strong and flexible silicone rubber gasket. Ideal for sealing in construction, applied to glazed surfaces, aluminum, tempered glass and joint, tiles and sanitary products.

Performance

One cartridge yields 7.90, in 6 x 6mm joints. Considering 7% waste.

Usefull lifetime

12 months in a cool and dry cellar, in the closed container at a temperature below 26 ° Celsius.

Advantages

  • Anti-fungus.
  • Cures at room temperature.
  • Flexibility
  • It is not flammable.
  • Excellent resistance to oils.
  • Stability and high elasticity in humid environments.
  • Waterproof and hermetic.
  • Excellent adhesion and high viscosity.

Spec Sheet

Visual (appearance) Paste
Standard Color Translucent
Drip OMM
Dry to the touch 10 minutes
Total Cure 24 hours
Specified Weight 1,12 g/ml
Maximum Temperature 150° c
Application temperature 0.94 g/ml
Usefull lifetime 12 months

PRESENTACIÓN DE 300 ML

DISPONIBLE EN: NEGRO, BLANCO Y TRANSPARENTE

Application

Clean and dry surface. Cut off the tip of the cartridge. Screw on the applicator nozzle, which should be cut at a 45 ° angle. Place the cartridge in the applicator gun and apply a continuous and uniform bead of the product to one of the parts. Assemble and remove excess product. After use, leave a small amount of product on the tip to form a plug. To use again remove the cap.

Precautions

  • Keep out of the reach of children and animals.
  • Avoid direct contact of the product that is not dry with the skin and eyes. In case it happens, wash with plenty of water and seek medical attention.
  • Apply in a ventilated place, since during drying the release of acetic acid vapor occurs.
  • Do not return excess material to the original container to avoid contamination of the remaining product.

Recommendations

This product is not recommended for use with oxygen systems. It is not recommended as a sealant in systems with high concentrations of chlorine and / or strong oxidizing materials. Products should be stored in a cool, dry place, in closed containers at a temperature below 26 ° Celsius.

Maintenance

  • Does not require any maintenance.
  • If the seal is damaged, replace the damaged section by cleaning the surface before applying the new sealant.

Limitations

  • It is not recommended on surfaces that are in continuous contact with water.
  • In floor joints or continuous traffic.
  • On galvanized sheet roofs.
×